Fills a drawing area with a bitmap image. The bitmap can be repeated or
tiled to fill the area. The fill remains in effect until you call the
beginFill(), beginBitmapFill(),
beginGradientFill(), or beginShaderFill()
method. Calling the clear() method clears the fill.
The application renders the fill whenever three or more points are
drawn, or when the endFill() method is called.
A transparent or opaque bitmap image that contains the bits to be displayed.
A matrix object(of the openfl.geom.Matrix class), which you can use to define transformations on the bitmap. For example, you can use the following matrix to rotate a bitmap by 45 degrees(pi/4 radians):
If true, the bitmap image repeats in a tiled
pattern. If false, the bitmap image does not
repeat, and the edges of the bitmap are used for any fill
area that extends beyond the bitmap.
For example, consider the following bitmap(a 20 x
20-pixel checkerboard pattern):
When `repeat` is set to `true`(as
in the following example), the bitmap fill repeats the
bitmap:
When `repeat` is set to `false`,
the bitmap fill uses the edge pixels for the fill area
outside the bitmap:
If false, upscaled bitmap images are rendered
by using a nearest-neighbor algorithm and look pixelated. If
true, upscaled bitmap images are rendered by
using a bilinear algorithm. Rendering by using the nearest
neighbor algorithm is faster.
Specifies a simple one-color fill that subsequent calls to other Graphics
methods(such as lineTo() or drawCircle()) use
when drawing. The fill remains in effect until you call the
beginFill(), beginBitmapFill(),
beginGradientFill(), or beginShaderFill()
method. Calling the clear() method clears the fill.
The application renders the fill whenever three or more points are
drawn, or when the endFill() method is called.
The color of the fill(0xRRGGBB).
The alpha value of the fill(0.0 to 1.0).
Specifies a gradient fill used by subsequent calls to other Graphics
methods(such as lineTo() or drawCircle()) for
the object. The fill remains in effect until you call the
beginFill(), beginBitmapFill(),
beginGradientFill(), or beginShaderFill()
method. Calling the clear() method clears the fill.
The application renders the fill whenever three or more points are
drawn, or when the endFill() method is called.
A value from the GradientType class that
specifies which gradient type to use:
GradientType.LINEAR or
GradientType.RADIAL.
A transformation matrix as defined by the
openfl.geom.Matrix class. The openfl.geom.Matrix
class includes a
createGradientBox() method, which
lets you conveniently set up the matrix for use
with the beginGradientFill()
method.
A value from the SpreadMethod class that
specifies which spread method to use, either:
SpreadMethod.PAD,
SpreadMethod.REFLECT, or
SpreadMethod.REPEAT.
For example, consider a simple linear
gradient between two colors:
This example uses
`SpreadMethod.PAD` for the spread
method, and the gradient fill looks like the
following:
If you use `SpreadMethod.REFLECT`
for the spread method, the gradient fill looks
like the following:
If you use `SpreadMethod.REPEAT`
for the spread method, the gradient fill looks
like the following:
A value from the InterpolationMethod class that
specifies which value to use:
InterpolationMethod.LINEAR_RGB or
InterpolationMethod.RGB
For example, consider a simple linear
gradient between two colors(with the
`spreadMethod` parameter set to
`SpreadMethod.REFLECT`). The
different interpolation methods affect the
appearance as follows:
A number that controls the location of the
focal point of the gradient. 0 means that the
focal point is in the center. 1 means that the
focal point is at one border of the gradient
circle. -1 means that the focal point is at the
other border of the gradient circle. A value
less than -1 or greater than 1 is rounded to -1
or 1. For example, the following example shows
a focalPointRatio set to 0.75:
Clears the graphics that were drawn to this Graphics object, and resets fill and line style settings.
Draws a curve using the current line style from the current drawing
position to(anchorX, anchorY) and using the control point that
(controlX, controlY) specifies. The current
drawing position is then set to(anchorX,
anchorY). If the movie clip in which you are drawing contains
content created with the Flash drawing tools, calls to the
curveTo() method are drawn underneath this content. If you
call the curveTo() method before any calls to the
moveTo() method, the default of the current drawing position
is(0, 0). If any of the parameters are missing, this method fails and the
current drawing position is not changed.
The curve drawn is a quadratic Bezier curve. Quadratic Bezier curves consist of two anchor points and one control point. The curve interpolates the two anchor points and curves toward the control point.
A number that specifies the horizontal position of the control point relative to the registration point of the parent display object.
A number that specifies the vertical position of the control point relative to the registration point of the parent display object.
A number that specifies the horizontal position of the next anchor point relative to the registration point of the parent display object.
A number that specifies the vertical position of the next anchor point relative to the registration point of the parent display object.
Draws a circle. Set the line style, fill, or both before you call the
drawCircle() method, by calling the linestyle(),
lineGradientStyle(), beginFill(),
beginGradientFill(), or beginBitmapFill()
method.
The x location of the center of the circle relative to the registration point of the parent display object(in pixels).
The y location of the center of the circle relative to the registration point of the parent display object(in pixels).
The radius of the circle(in pixels).
Draws an ellipse. Set the line style, fill, or both before you call the
drawEllipse() method, by calling the
linestyle(), lineGradientStyle(),
beginFill(), beginGradientFill(), or
beginBitmapFill() method.
The x location of the top-left of the bounding-box of the ellipse relative to the registration point of the parent display object(in pixels).
The y location of the top left of the bounding-box of the ellipse relative to the registration point of the parent display object(in pixels).
The width of the ellipse(in pixels).
The height of the ellipse(in pixels).
Submits a series of IGraphicsData instances for drawing. This method accepts a Vector containing objects including paths, fills, and strokes that implement the IGraphicsData interface. A Vector of IGraphicsData instances can refer to a part of a shape, or a complex fully defined set of data for rendering a complete shape.
Graphics paths can contain other graphics paths. If the
graphicsData Vector includes a path, that path and all its
sub-paths are rendered during this operation.
Submits a series of commands for drawing. The drawPath()
method uses vector arrays to consolidate individual moveTo(),
lineTo(), and curveTo() drawing commands into a
single call. The drawPath() method parameters combine drawing
commands with x- and y-coordinate value pairs and a drawing direction. The
drawing commands are values from the GraphicsPathCommand class. The x- and
y-coordinate value pairs are Numbers in an array where each pair defines a
coordinate location. The drawing direction is a value from the
GraphicsPathWinding class.
Generally, drawings render faster with drawPath() than
with a series of individual lineTo() and
curveTo() methods.
The drawPath() method uses a uses a floating computation
so rotation and scaling of shapes is more accurate and gives better
results. However, curves submitted using the drawPath()
method can have small sub-pixel alignment errors when used in conjunction
with the lineTo() and curveTo() methods.
The drawPath() method also uses slightly different rules
for filling and drawing lines. They are:
When a fill is applied to rendering a path:
A sub-path of less than 3 points is not rendered.(But note that the stroke rendering will still occur, consistent with the rules for strokes below.)
When a stroke is applied to rendering a path:
The sub-paths can be composed of any number of points.
Specifies the winding rule using a value defined in the GraphicsPathWinding class.
Draws a rectangle. Set the line style, fill, or both before you call the
drawRect() method, by calling the linestyle(),
lineGradientStyle(), beginFill(),
beginGradientFill(), or beginBitmapFill()
method.
A number indicating the horizontal position relative to the registration point of the parent display object(in pixels).
A number indicating the vertical position relative to the registration point of the parent display object(in pixels).
The width of the rectangle(in pixels).
The height of the rectangle(in pixels).
Draws a rounded rectangle. Set the line style, fill, or both before you
call the drawRoundRect() method, by calling the
linestyle(), lineGradientStyle(),
beginFill(), beginGradientFill(), or
beginBitmapFill() method.
A number indicating the horizontal position relative to the registration point of the parent display object(in pixels).
A number indicating the vertical position relative to the registration point of the parent display object (in pixels).
The width of the round rectangle(in pixels).
The height of the round rectangle(in pixels).
The width of the ellipse used to draw the rounded corners(in pixels).
The height of the ellipse used to draw the rounded
corners(in pixels). Optional; if no value is
specified, the default value matches that provided
for the ellipseWidth parameter.
Renders a set of triangles, typically to distort bitmaps and give them a
three-dimensional appearance. The drawTriangles() method maps
either the current fill, or a bitmap fill, to the triangle faces using a
set of(u,v) coordinates.
Any type of fill can be used, but if the fill has a transform matrix that transform matrix is ignored.
A uvtData parameter improves texture mapping when a
bitmap fill is used.
Specifies whether to render triangles that face in a specified direction. This parameter prevents the rendering of triangles that cannot be seen in the current view. This parameter can be set to any value defined by the TriangleCulling class.
Applies a fill to the lines and curves that were added since the last call
to the beginFill(), beginGradientFill(), or
beginBitmapFill() method. Flash uses the fill that was
specified in the previous call to the beginFill(),
beginGradientFill(), or beginBitmapFill()
method. If the current drawing position does not equal the previous
position specified in a moveTo() method and a fill is
defined, the path is closed with a line and then filled.
Specifies a bitmap to use for the line stroke when drawing lines.
The bitmap line style is used for subsequent calls to Graphics methods
such as the lineTo() method or the drawCircle()
method. The line style remains in effect until you call the
lineStyle() or lineGradientStyle() methods, or
the lineBitmapStyle() method again with different parameters.
You can call the lineBitmapStyle() method in the middle of
drawing a path to specify different styles for different line segments
within a path.
Call the lineStyle() method before you call the
lineBitmapStyle() method to enable a stroke, or else the
value of the line style is undefined.
Calls to the clear() method set the line style back to
undefined.
The bitmap to use for the line stroke.
An optional transformation matrix as defined by the openfl.geom.Matrix class. The matrix can be used to scale or otherwise manipulate the bitmap before applying it to the line style.
Whether to repeat the bitmap in a tiled fashion.
Whether smoothing should be applied to the bitmap.
Specifies a gradient to use for the stroke when drawing lines.
The gradient line style is used for subsequent calls to Graphics
methods such as the lineTo() methods or the
drawCircle() method. The line style remains in effect until
you call the lineStyle() or lineBitmapStyle()
methods, or the lineGradientStyle() method again with
different parameters.
You can call the lineGradientStyle() method in the middle
of drawing a path to specify different styles for different line segments
within a path.
Call the lineStyle() method before you call the
lineGradientStyle() method to enable a stroke, or else the
value of the line style is undefined.
Calls to the clear() method set the line style back to
undefined.
A value from the GradientType class that specifies which gradient type to use, either GradientType.LINEAR or GradientType.RADIAL.
A transformation matrix as defined by the
openfl.geom.Matrix class. The openfl.geom.Matrix
class includes a
createGradientBox() method, which
lets you conveniently set up the matrix for use
with the lineGradientStyle()
method.
A value from the SpreadMethod class that specifies which spread method to use:
A value from the InterpolationMethod class that
specifies which value to use. For example,
consider a simple linear gradient between two
colors(with the spreadMethod
parameter set to
SpreadMethod.REFLECT). The
different interpolation methods affect the
appearance as follows:
A number that controls the location of the
focal point of the gradient. The value 0 means
the focal point is in the center. The value 1
means the focal point is at one border of the
gradient circle. The value -1 means that the
focal point is at the other border of the
gradient circle. Values less than -1 or greater
than 1 are rounded to -1 or 1. The following
image shows a gradient with a
focalPointRatio of -0.75:
Specifies a line style used for subsequent calls to Graphics methods such
as the lineTo() method or the drawCircle()
method. The line style remains in effect until you call the
lineGradientStyle() method, the
lineBitmapStyle() method, or the lineStyle()
method with different parameters.
You can call the lineStyle() method in the middle of
drawing a path to specify different styles for different line segments
within the path.
Note: Calls to the clear() method set the line
style back to undefined.
Note: Flash Lite 4 supports only the first three parameters
(thickness, color, and alpha).
An integer that indicates the thickness of the line in points; valid values are 0-255. If a number is not specified, or if the parameter is undefined, a line is not drawn. If a value of less than 0 is passed, the default is 0. The value 0 indicates hairline thickness; the maximum thickness is 255. If a value greater than 255 is passed, the default is 255.
A hexadecimal color value of the line; for example, red is 0xFF0000, blue is 0x0000FF, and so on. If a value is not indicated, the default is 0x000000 (black). Optional.
A number that indicates the alpha value of the color of the line; valid values are 0 to 1. If a value is not indicated, the default is 1(solid). If the value is less than 0, the default is 0. If the value is greater than 1, the default is 1.
(Not supported in Flash Lite 4) A value from the LineScaleMode class that specifies which scale mode to use:
* `LineScaleMode.NORMAL` - Always
scale the line thickness when the object is scaled
(the default).
* `LineScaleMode.NONE` - Never scale
the line thickness.
* `LineScaleMode.VERTICAL` - Do not
scale the line thickness if the object is scaled
vertically _only_. For example, consider the
following circles, drawn with a one-pixel line, and
each with the `scaleMode` parameter set to
`LineScaleMode.VERTICAL`. The circle on the
left is scaled vertically only, and the circle on the
right is scaled both vertically and horizontally:
* `LineScaleMode.HORIZONTAL` - Do not
scale the line thickness if the object is scaled
horizontally _only_. For example, consider the
following circles, drawn with a one-pixel line, and
each with the `scaleMode` parameter set to
`LineScaleMode.HORIZONTAL`. The circle on
the left is scaled horizontally only, and the circle
on the right is scaled both vertically and
horizontally:
(Not supported in Flash Lite 4) A value from the
CapsStyle class that specifies the type of caps at the
end of lines. Valid values are:
CapsStyle.NONE,
CapsStyle.ROUND, and
CapsStyle.SQUARE. If a value is not
indicated, Flash uses round caps.
For example, the following illustrations show the
different `capsStyle` settings. For each
setting, the illustration shows a blue line with a
thickness of 30(for which the `capsStyle`
applies), and a superimposed black line with a
thickness of 1(for which no `capsStyle`
applies):
(Not supported in Flash Lite 4) A value from the
JointStyle class that specifies the type of joint
appearance used at angles. Valid values are:
JointStyle.BEVEL,
JointStyle.MITER, and
JointStyle.ROUND. If a value is not
indicated, Flash uses round joints.
For example, the following illustrations show the
different `joints` settings. For each
setting, the illustration shows an angled blue line
with a thickness of 30(for which the
`jointStyle` applies), and a superimposed
angled black line with a thickness of 1(for which no
`jointStyle` applies):
**Note:** For `joints` set to
`JointStyle.MITER`, you can use the
`miterLimit` parameter to limit the length
of the miter.
(Not supported in Flash Lite 4) A number that
indicates the limit at which a miter is cut off. Valid
values range from 1 to 255(and values outside that
range are rounded to 1 or 255). This value is only
used if the jointStyle is set to
"miter". The miterLimit
value represents the length that a miter can extend
beyond the point at which the lines meet to form a
joint. The value expresses a factor of the line
thickness. For example, with a
miterLimit factor of 2.5 and a
thickness of 10 pixels, the miter is cut
off at 25 pixels.
For example, consider the following angled lines,
each drawn with a `thickness` of 20, but
with `miterLimit` set to 1, 2, and 4.
Superimposed are black reference lines showing the
meeting points of the joints:
Notice that a given `miterLimit` value
has a specific maximum angle for which the miter is
cut off. The following table lists some examples:
Draws a line using the current line style from the current drawing
position to(x, y); the current drawing position
is then set to(x, y). If the display object in
which you are drawing contains content that was created with the Flash
drawing tools, calls to the lineTo() method are drawn
underneath the content. If you call lineTo() before any calls
to the moveTo() method, the default position for the current
drawing is(0, 0). If any of the parameters are missing, this
method fails and the current drawing position is not changed.
A number that indicates the horizontal position relative to the registration point of the parent display object(in pixels).
A number that indicates the vertical position relative to the registration point of the parent display object(in pixels).
Moves the current drawing position to(x, y). If
any of the parameters are missing, this method fails and the current
drawing position is not changed.
A number that indicates the horizontal position relative to the registration point of the parent display object(in pixels).
A number that indicates the vertical position relative to the registration point of the parent display object(in pixels).
Generated using TypeDoc
The Graphics class contains a set of methods that you can use to create a vector shape. Display objects that support drawing include Sprite and Shape objects. Each of these classes includes a
graphicsproperty that is a Graphics object. The following are among those helper functions provided for ease of use:drawRect(),drawRoundRect(),drawCircle(), anddrawEllipse().You cannot create a Graphics object directly from ActionScript code. If you call
new Graphics(), an exception is thrown.The Graphics class is final; it cannot be subclassed.